Frost Line Depth in New York

  • 5 verified values
  • 68 places covered
  • Checked Oct 2026

Verified range

42–48 in across New York

New York’s code leaves frost line depth to each city or county, which writes it into its own code.

State document: dos.ny.gov

How deep is the frost line in New York?

New York has no single statewide frost line depth. New York’s code leaves frost line depth to each city or county, which writes it into its own code. The 2 verified local values we have read range from 42 to 48 inches, so check your own city or county.

Who sets the frost line depth in New York?

Under IRC Table R301.2, the jurisdiction fills in the frost line depth as the minimum depth of footing below finish grade. In New York that job falls to each city or county, so the number lives in local codes rather than in one state table, and two neighbouring places can differ.

“The local jurisdiction shall provide the minimum depth of footing below finish grade.”

State document: dos.ny.gov, read October 2026.

How do New York jurisdictions choose a frost depth?

The 2020 Residential Code of New York State leaves the frost line depth to each local jurisdiction. A Department of State technical bulletin says localities should base the number on the air freezing index, soil, water table, local history and field experience. Winters vary widely across the state, from 66 freezing nights a year near New York City to 201 in the Adirondacks.

Frost line depth in New York cities and counties

Every New York place we cover, largest first. Verified values come from the place’s own code or the state rule; the others show nearby official values and who to ask.

New York frost line depths, checked Oct 2026
PlaceFrost lineType
Kings County48 in (New York rule)County
New York County48 in (New York rule)County
Suffolk CountyNo official local valueCounty
Nassau CountyNo official local valueCounty
Westchester CountyNo official local valueCounty
Erie CountyNo official local valueCounty
Monroe CountyNo official local valueCounty
Richmond County48 in (New York rule)County
Onondaga CountyNo official local valueCounty
Orange CountyNo official local valueCounty
Rockland CountyNo official local valueCounty
Albany CountyNo official local valueCounty
Dutchess CountyNo official local valueCounty
BuffaloNo official local valueCity
Saratoga CountyNo official local valueCounty
Oneida CountyNo official local valueCounty
Niagara CountyNo official local valueCounty
YonkersNo official local valueCity
RochesterNo official local valueCity
Broome CountyNo official local valueCounty
Ulster CountyNo official local valueCounty
Schenectady CountyNo official local valueCounty
Rensselaer CountyNo official local valueCounty
SyracuseNo official local valueCity
Chautauqua CountyNo official local valueCounty
Oswego CountyNo official local valueCounty
Jefferson CountyNo official local valueCounty
Ontario CountyNo official local valueCounty
St. Lawrence CountyNo official local valueCounty
Tompkins CountyNo official local valueCounty
AlbanyNo official local valueCity
Putnam CountyNo official local valueCounty
Steuben CountyNo official local valueCounty
Wayne CountyNo official local valueCounty
New RochelleNo official local valueCity
Chemung CountyNo official local valueCounty
Sullivan CountyNo official local valueCounty
Clinton CountyNo official local valueCounty
Cattaraugus CountyNo official local valueCounty
Cayuga County48 inCounty
Mount Vernon42 inCity
SchenectadyNo official local valueCity
Madison CountyNo official local valueCounty
Warren CountyNo official local valueCounty
UticaNo official local valueCity
White PlainsNo official local valueCity
Livingston CountyNo official local valueCounty
Columbia CountyNo official local valueCounty
Otsego CountyNo official local valueCounty
Washington CountyNo official local valueCounty
Herkimer CountyNo official local valueCounty
HempsteadNo official local valueCity
Genesee CountyNo official local valueCounty
Fulton CountyNo official local valueCounty
TroyNo official local valueCity
Montgomery CountyNo official local valueCounty
Tioga CountyNo official local valueCounty
Niagara FallsNo official local valueCity
Greene CountyNo official local valueCounty
BinghamtonNo official local valueCity
Allegany CountyNo official local valueCounty
Franklin CountyNo official local valueCounty
Chenango CountyNo official local valueCounty
Cortland CountyNo official local valueCounty
Delaware CountyNo official local valueCounty
FreeportNo official local valueCity
Kiryas JoelNo official local valueCity
Valley StreamNo official local valueCity

How deep do footings need to be in New York?

Exterior footings go at least 12 inches below undisturbed ground and below the depth your city or county sets, measured to the bottom of the footing. The residential code (IRC R403.1.4.1) also accepts a frost-protected shallow foundation, a design to ASCE 32 or solid rock in place of digging to the frost line, and it exempts small free-standing accessory buildings: light-frame ones up to 600 square feet with eaves 10 feet high or lower. New York may amend these rules, so confirm them with your building department. More detail: footing depth.

How deep should deck footings and fence posts be in New York?

A deck attached to the house needs footings below the depth your city or county sets. Under the 2021 and 2024 IRC a free-standing deck needs footings only 12 inches deep, and the 2018 edition exempts free-standing decks from the frost rule, so the answer depends on the edition New York adopted. See deck footing depth.

The residential code sets no fence-post depth, and fences up to 7 feet tall are exempt from a building permit (IRC R105.2), though zoning still applies. A common practice is to bury about half the above-ground height, and to reach the frost line when posts are set in concrete. See fence post depth.

How deep are water lines buried in New York?

Under the IRC plumbing rule (P2603.5), a water service line goes at least 12 inches deep and at least 6 inches below the frost line. States that use the Uniform Plumbing Code or their own plumbing rules word this differently, so ask your plumbing inspector which code applies in New York. See water line depth.

How cold do New York winters get?

Across the 68 New York places we track, nights at or below 32 °F range from 66 a year in Kings County to 201 in Franklin County. The average low in the coldest month runs from 2.3 °F in Franklin County to 27.9 °F in New York County (NOAA 1991–2020 normals, nearest station). Colder winters drive frost deeper in a hard year, but the code depth does not change with the weather. See frost penetration depth.

How do New York soils affect frost heave?

The USDA soil survey rates how prone soil is to frost action. Around the 68 New York places we sampled, the main rating is moderate at 46 places, high at 17 places and low at 5 places. Fine, wet soils rated moderate or high heave the most, so drainage and clean gravel backfill matter more there. The rating does not change the code depth. See frost heave.

How do you confirm the frost line with your New York building department?

  1. Find your city or county in the table above, or enter your ZIP code; a ZIP can cross into a second county.
  2. Ask the building department what frost line depth it uses for Table R301.2, measured to the bottom of the footing, and whether it has local rules for decks, sheds or fences.
  3. Ask the plumbing inspector how deep water and sewer lines must go.
  4. Call Dig Safely New York a few days before you dig so buried utilities are marked.